Monitor & Control Station Accessories

6131NT
6131NT
6131NT
6131NT
DRC-12
DRC-12
DRC-4
DRC-4
ZA-8N
ZA-8N
ZP-4
ZP-4
ZP-8
ZP-8
ZP-8AN
ZP-8AN

Independent Zone Annunciator

ZA-8N

  • Full zone status indication with eight red LEDs
  • Built-in buzzer
  • Selectable N/O, N/C supervised loops
  • Individual zone bypass switches with bypass disable feature
  • Individual zone outputs to drive relays or strobe lamps
  • Common relay output, S.P.D.T. contacts rated 12A @ 12VDC or 120VAC
  • Adjustable door ajar timer
  • Memory for each zone
  • Operates on 12 Volts AC or DC
  • Remote plate connector for remote monitoring, use ZP-1AN remote plate
  • Cabinet size: 10"W x 7"H x 2"D
  • Lifetime limited warranty

ZA-8N Sell Sheet
ZA-8N Installation Instructions

Remote Display

ZP-8AN

  • Remote display for use with ZA-8N; single gang stainless steel plate
  • Eight red LED status indicators
  • Momentary action resent switch
  • Duplicates teh LED display on the ZA-8N zone annunciator

ZP-8AN Wiring Instructions

Annunciator Plates

ZP-4, ZP-8

  • ZP-4 Four 1/4" red LEDs numbered one to four
  • ZP-8 Eight 1/4" red LEDs, numberd one to four
  • Single gang brushed stainelss steel plate
  • LEDS operate on 12 or 24 Volts DC
  • LED current draw 10 mA @ 12 Volts DC, 5 mA @ 25 Volts DC
  • LEDs provided with red and black 6" leads
  • Plate screen printed wtih expoxy ink

Desk Top Door Control Consoles

DRC-12

  • ABS beige sloping front console
  • Size: 5"L x 6.5"W x 2.5"-1.5"D
  • Twelve normally-open momentary push buttons
  • Contacts rated .4A
  • Switch terminated with screw terminals

DRC-4

  • Beige sloping front console
  • Size: 5-1/2"L x 3"W x 1-1/2 to 1"D
  • Four normally-open flush white push buttons
  • 8' Cable
  • Contact rating .5A
  • RJ31X jack for terminating wiring
  • Custom silkscreening available

Burglary Control

6131NT

  • Adjustable entry/exit delay, independtly adjustable from 2 to 60 seconds
  • Adjustable bell cut-off, auto restore time 2 to 15 minutes
  • Regulated voltage output, 13.8 VDC, 300mA
  • Latching panic circuit
  • Built-in battery charger; built-in pulse stretcher
  • Power input 12 VAC, class 2 plug-in transformer, transformer not supplied 
  • 12VDC, 4 AH recharagable battery, battery not supplied
  • Bell/siren output 12VDC, 2.5A
  • Dry contacts SPDT N/O, contact rated 5A @ 28VDC
  • Pre-alarm output 12VDC for SC628 sonalert or equal
  • Open circuit instant loop
  • Closed circuit instant loop
  • Closed circuit delay loops
  • 24 hour latching panic circuit
  • Cabinet size: 11"H x 9"W x 3"D

6131 Installation Instructions