A MOMENTARY OR SUSTAINED CLOSURE OF THE NORMALL-OPEN TRIGGER INPUT WILL CAUSE THE RELAY CONTACTS TO TRANSFER AND REMAIN CLOSED UNTIL THE DELAY PERIOD ENDS. AT THE END OF THE DELAY PERIOD THE RELAY CONTACTS WILL RETURN TO THEIR ORIGINAL STATE.

• VOLTAGE RANGE: 12 TO 24 VOLTS AC/DC
• CURRENT DRAW: 37 MA.
• RELAY OPERATING MODE: ONE SHOT
• CONTACT ARRANGEMENT: S.P.D.T.
• CONTACT RATING: 2A. @ 35VDC/125VAC
• TIME SETTING: ADJUSTABLE FROM TWO SECONDS TO 45 SECONDS
• TEMPERATURE RATING: -25C TO +70C
• MOUNTING: ADHESIVE FOAM TAPE
• SIZE: 1.75" x 1.75" 
• TIMER IS ENCAPSULATED FOR MOISTURE PROTECTION       

FAIL-SAFE MINI TIMER

• VOLTAGE RANGE: 12 TO 24 VOLTS AC/DC
• CURRENT DRAW: 37 MA. MAXIMUM
• RELAY OPERATING MODE: ONE SHOT
• CONTACT ARRANGEMENT: S.P.D.T.
• CONTACT RATING: 2A. @ 35 VDC/125VAC
• TIME SETTING: ADJUSTABLE FROM 2 TO 45 SECONDS
• MOUNTING: ADHESIVE FOAM TAPE
• TEMPERATURE RANGE: -25C TO + 70C
• SIZE: 1.75 x 1.75
• TIMER IS ENCAPULATED FOR MOISTURE PROTECTION

THE MT-2 IS PROVIDED WITH A PIEZO OUTPUT FOR A REMOTE AUDIBLE SIGNAL. THE MT-2 HAS THREE TRIGGER INPUTS, NORMALLY-OPEN, NORMALLY-CLOSED AND VOLTAGE.

A MOMENTARY OR SUSTAINED CLOSURE OF ANY OF THE TRIGGER INPUTS WILL CAUSE THE RELAY CONTACTS TO TRANSFER AND REMAIN CLOSED UNTIL THE DELAY PERIOD ENDS.AT THE END OF THE DELAY PERIOD THE RELAY CONTACTS WILL RETURN TO THEIR ORIGINAL STATE.

• VOLTAGE RANGE: 12 TO 24 VOLTS AC/DC
• CURRENT DRAW: 37 MA. MAXIMUM
• RELAY OPERATING MODE: ONE SHOT
• CONTACT ARRANGEMENT: S.P.D.T.
• CONTACT RATING: 2A. @ 35 VDC/125 VAC
• TIME SETTING: ADJUATABLE FROM 2 TO 45 SECONDS
• MOUNTING: ADHESIVE FOAM TAPE
• TEMPERATURE RANGE: -25C TO +70C
• SIZE: 1.75" x 1.75" x .5"
• TIMER IS ENCAPSULATED FOR MOISTURE PROTECTION

THE T-7P TIMER IS A PRECISION DIGITAL TIMER WHICH OPERATES A AINGLE POLE DOUBLE THROW RELAY ACCORDING TO A PROGRAMMED SET OF OPERATING INSTRUCTIONS.

• VOLTAGE RANGE: 12 TO 24 VOLTS AC/DC
• CURRENT DRAW: 8 MA. IDLE, 40 MA. RELAY ENERGIZED
• RELAY CONTACTS: S.P.D.T.
• RELAY MODE: LATCHING OR MOMENTARY
• RELAY ON TIME: ADJUSTABLE FROM ONE SECOND TO THREE MINUTES
• CONTACT RATING: 10A. @ 35 VOLTS DC, 125 VOLTS AC
• TIME BASE: QUARTZ STABILIZED
• PROGRAMS: 8 "ON" AND 8 "OFF" TIMES PER DAY, A TOTAL OF 42 EVENTS
• ACCURACY: PLUS OR MINUS 1 SECOND PER DAY
• DISPLAY: LCD, 7 SEGMENTS
• MEMORY BACK-UP: LITHIUM BATTERY, 60 HOUR DURATION
• CLOCK FORMAT: 12 HOUR STANDARD, 25 HOUR AVAILABLE
• TEMPERATURE RANGE: -25C TO +70C
• MOUNTING: ADHESIVE FOAM TAPE, FOUR .140 DIAMETER HOLES
• SIZE: 4" x 5.25"

THE TALENTO 800 TIMER IS ANE ELECTRONIC TIME SWITCH WITH ONE CHANNEL THAT IS FREELY PROGRAMMED WITH A TOTAL OF 400 SCHEDULES.

THE LOAD STATUS, TIME OF DAY, AND DATE ARE DISPLAYED ON A LARGE LCD READOUT.

IN ADDITION TO CONVENTIONAL "ON/OFF" PROGRAMMING, THE UNIT PROVIDES A "PULSE" AND "CYCLE" FUNCTION.

THE TALENTO 800 TIMER CAN BE PROGRAMMED WITH 24 HOUR, 2 DAY OR 365 DAY SCHEDULE, (WITH INDIVIDUAL HOLIDAYS OR HOLIDAY/VACATION PERIODS.)

THIS TIMER INCORPORATES A CALENDAR THROUGH THE YEAR 2095 AND ALSO INCLUDES AUTOMATIC LEAP YEAR ADJUSTMENT.

THE ANNUAL DAYLIGHT SAVINGS/STANDARD TIME CHANGES CAN BE PROGRAMMED TO OCCUR AUTOMATICALLY EACH YEAR THROUGH 2095.

• INPUT VOLTAGE: 24 VOLTS AC/DC
• POWER CONSUMPTION: 5 VA.
• RELAY CONTACT RATING: 16A. @ 24/250 VOLTS AC
• RELAY CONTACTS: S.P.D.T.
• BACK-UP BATTERY LIFE: 6 YEARS, (REPLACEABLE)
• DISPLAY: AM/PM, LCD, 1" x 1-11/16"
• TEMPERATURE RANGE: -13F TO 131F
• MOUNTING: REQUIRES 4" x 4" OF SPACE, SURFACE OR DIN RAIL MOUNTING

UNIVERSAL TIMER HAS FOUR FUCTIONS, DELAY ON OPERATE, DELAY ON RELAESE, ONE SHOT AND PULSING.

• VOLTAGE RANGE: 12 VOLTS DC
• CURRENT DRAW: 37 MA.MAXIMUM
• TIME RANGE: 1 SECOND TO ONE HOUR
• CONTACT ARRANGEMENT: S.P.D.T.
• CONTACT RATING: 10A @ 35 VDC/125 VAC
• TEMPERATURE RANGE: -25C TO +70C
• MOUNTING: ADHESIVE FOAM TAPE
• SIZE: 2.125" x 5.187"
• SPECIFY UT-1/24 FOR 24 VOLT DC MODEL